showSiteSsrServicePath
Get service path information of the Device.
The output will be available through websocket. As there can be multiple command issued against the same device at the same time and the output all goes through the same websocket stream, session is introduced for demux.
Subscribe to Device Command outputs
WS /api-ws/v1/stream
{ "subscribe": "/sites/{site_id}/devices/{device_id}/cmd" }Example output from ws stream
{ "channel": "/sites/d6fb4f96-xxxx-xxxx-xxxx-xxxxxxxxxxxx/devices/00000000-0000-0000-1000-xxxxxxxxxxxx/cmd", "event": "data", "data": { "session": "5cb8a6db-d11a-42cd-bed7-19e9f29e637", "raw": "{\"status\":\"SUCCESS\",\"finished\":true,\"rows\":[{\"service\":\"management\",\"type\":\"service-agent\",\"network_interface\":\"ge-0/0/0\",\"destination\":\"\",\"gateway_ip\":\"192.168.1.1\",\"vector\":\"\",\"cost\":0,\"rate\":0,\"state\":\"Up\",\"capacity\":\"0/unlimited\",\"meetsSLA\":\"Yes\"},{\"service\":\"management\",\"type\":\"service-agent\",\"network_interface\":\"ge-0/0/1\",\"destination\":\"\",\"gateway_ip\":\"192.168.0.1\",\"vector\":\"\",\"cost\":0,\"rate\":0,\"state\":\"Up\",\"capacity\":\"0/unlimited\",\"meetsSLA\":\"Yes\"}]}" }}Preferred authentication method for automation and integrations. Send the API token in the HTTP Authorization header.
Format:
Authorization: Token {apitoken}
Notes:
- An API token generated for a specific admin has the same privileges as that admin
- An API token is automatically removed if it is not used for more than 90 days
- SSO admins cannot generate admin API tokens. Use organization API tokens when scoped Org/Site privileges are needed.
In: header
Path Parameters
uuiduuidRequest Body
application/json
Service path lookup request for SSR devices
HA cluster node on which to show the service path. enum: node0, node1.
Value in
- "node0"
- "node1"
Exact service name for which to display the service path
Response Body
curl -X POST "https://example.com/api/v1/sites/000000ab-00ab-00ab-00ab-0000000000ab/devices/000000ab-00ab-00ab-00ab-0000000000ab/show_service_path" \ -H "Content-Type: application/json" \ -d '{ "node": "node0", "service_name": "any" }'{ "session": "19e73828-937f-05e6-f709-e29efdb0a82b"}showSiteSsrAndSrxSessions POST
Get active sessions passing through the Device. The output will be available through websocket. As there can be multiple command issued against the same device at the same time and the output all goes through the same websocket stream, session is introduced for demux. #### Subscribe to Device Command outputs `WS /api-ws/v1/stream` ```json { "subscribe": "/sites/{site_id}/devices/{device_id}/cmd" } ``` #### Example output from ws stream ```json { "channel": "/sites/d6fb4f96-xxxx-xxxx-xxxx-xxxxxxxxxxxx/devices/00000000-0000-0000-1000-xxxxxxxxxxxx/cmd", "event": "data", "data": { "session": "f517bf29-1141-41ae-a084-17cacb0ccb57", "raw": "{\"status\":\"SUCCESS\",\"finished\":true,\"rows\":[{\"session_id\":\"a04b1cc7-dcc1-40a6-a010-0fe46ca38551\",\"direction\":\"forward\",\"service\":\"internet\",\"tenant\":\"SRV.PRD-Core\",\"device_interface\":\"ge-0/0/3\",\"network_interface\":\"ge-0/0/3.100\",\"protocol\":\"TCP\",\"source_ip\":\"10.3.20.101\",\"source_port\":45733,\"destination_ip\":\"13.38.46.35\",\"destination_port\":443,\"nat_ip\":\"192.168.1.115\",\"nat_port\":45256,\"payload_encrypted\":false,\"timeout\":1581,\"uptime\":319},{\"session_id\":\"a04b1cc7-dcc1-40a6-a010-0fe46ca38551\",\"direction\":\"reverse\",\"service\":\"internet\",\"tenant\":\"SRV.PRD-Core\",\"device_interface\":\"ge-0/0/0\",\"network_interface\":\"ge-0/0/0\",\"protocol\":\"TCP\",\"source_ip\":\"13.38.46.35\",\"source_port\":443,\"destination_ip\":\"192.168.1.115\",\"destination_port\":45256,\"nat_ip\":\"0.0.0.0\",\"nat_port\":0,\"payload_encrypted\":false,\"timeout\":1581,\"uptime\":319}]}\n" } } ```
testSiteSsrDnsResolution POST
DNS resolutions are performed on the Device. The output will be available through websocket. As there can be multiple commands issued against the same SSR at the same time and the output all goes through the same websocket stream, `session` is used for demux. #### Subscribe to Device Command outputs `WS /api-ws/v1/stream` ```json { "subscribe": "/sites/{site_id}/devices/{device_id}/cmd" } ``` ##### Example output from ws stream ``` Router | Hostname | Resolved | Last Resolved | Expiration -------------|------------------------|----------|----------------------|--------------------- test-device | xxx.yyy.net | Y | 2022-03-28T03:56:49Z | 2022-03-28T03:57:49Z ```